How do you get the brake piston to retreat back in caliper ?
You probably need to change your back brakes.
First make sure you use a screwdriver or brake adjusting tool to back the pads away from the drum through a slotted hole on the top back of the plate that holds the brake cylinder. Then tap the drum with a hammer carefully wearing glasses.
the socket should just turn out in the back under the hood.
look at it,, figure it out change the damm brake
To change the back brake on the 2000 FXD kindly refer to your user manual.
No, shocks.
sounds like the brake pads in front or back are worn out, if so need to change them before driving.
If you can't get to the back of the light through the trunk, you have to remove the light to change the bulb from the rear.
on all dodge trucks the way you change the bulbs is simply unscerew the tail light assembly and remove it from the rear of the vehicle and you will see your lightbulb fittings right on the back of the light assembly
yeah
One lifts the car on a car jack, removes the tires, remove the brake shoe, remove and replace the brake pad. Then one has to replace the brake shoe in the correct position, then put the tired back on the car.