0
You must turn the key to accessory mode and find a small hole in the housing where the barrel is. Push in with a paper clip or very small screw driver and pull the key and barrel out. When installing the new one, make sure you turn the key toward accessory mode before insterting it into the housing. You will hear the spring "click" Turn the key off and remove the key. DONE!
Add your answer:
Earn +20 pts
Change the ignition on a 2002 Ford Focus?
ignition switch
How to change ignition switch on a 95 Ford Explorer?
ok
How do you change ignition switch in a 98 ford explorer?
Remove the retaining nut from the ignition switch. Pull the switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
How do you change ignition switch on 97 ford expedition Eddie baur?
Do you mean the electrical ignition switch or the cylinder lock and key..?
How do you change ingnition on a Ford F-150?
Do you want the ignition switch or the key tumbler?
How do you replace the ignition switch on a 2000 Ford Expedition?
How do you replace the ignition switch on a 2000 ford expedition?
How do you replace the heater core on e150 1997?
How do i change the heater core on a 1997 ford e150
Remove ignition core from 1995 ford e150 van?
Remove the ignition retaining ring. Pull the ignition barrel out. Remove the wiring harness from the back of the ignition.
How to drill out ignition switch on 1985 Ford F-150?
How to drill out ignition switch on 1985 ford f150?
How do you remove ignition switch from 1992 Ford Explorer?
Type your answer here... How do you remove ignition switch from 1992 ford explorer?
Were is the solenoid switch on e-150 ford van v-8 1999..?
diagram of a 1995 ford E150 econ line solenoid switch
How do you change ignition switch on 1987 ford f150?
The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.
