it is on the trans,right side you will have to remove cat.converters to access.
on top of the transmission
The speed control device or speed sensor on a 1995 Ford Windstar is located on the transmission. It is a plug in just behind the bell housing.
Not familiar with the "4R" designation, but there are really only 2 'popular' speed sensors:ABS wheel sensorVehicle speed sensorBoth are well covered in the "Related Questions" below
on the top of the transmission it is very hard to get to i just got mine changed at a shop and i watched the guy change it.
Vehicle speed sensor - maybe(?)See "Related Questions" below for more
Friend: I sent my car to fix the moufle. After that some problems with the transmission began. The speed sensor was disconected by accident. The car was running on first and secong shift only. The computer show me the problem... The speed sensor is desconected. This sensor is so hard to reach. This is located between the exaust manifold and the monoblock wall. You need rise the vehicle and move you below it. Is not possible to see the connector, but you can see part of the sensor wall. If you see the right axle there is a mounted deviced located over it. this is the speed sensor. You can not see the connector, but you can feel it with the fingers ends only.. After two hours I had the speed sensor connected again and the car is running with no problem again. My windstar is very sensitive for this sensor.
Speed Sensor is not working
It's you're crank sensor engine speed mean that you're tcm doesn't get the right signal from you're ECM possible crank sensor
Remove the wiring harness from your speed sensor. Remove the speed sensor retaining bolts. Reverse the process to install your new speed sensor.
which year model, what transmission do you have, and which speed sensor are we talking about?
A "speed" sensor can affect the shifting of the trans.A "speed" sensor can affect the shifting of the trans.