answersLogoWhite

0


Best Answer

Loosten the p/s mounting bolts and move the pump. There is sometimes a hole in the pulley to gain access to the bolt behind it or you may need to pull the pulley,

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change power steering belts on a 84 Cadillac DeVille?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do install belts to a 97 deville?

How do install belts to a 97 deville?


How do you replace s belt on 1996 Cadillac deville?

Cadillacs and the northstar engine are notorious for squeaky belts. if i were you i would not do it yourself. take it to a dealer mechanic.


How do you replace the serpentine belt on a 2000 Cadillac Deville Northstar Engine?

The 2000 General Motors/Cadillac Deville came equipped in the 4.6L Northstar engine. Removing the main belt will require depressing the tensioner to free it. The new belt can then be routed across the accessory drive pulleys. The OE AC Delco belts for this application are 6K815 and 3K243.


How do you change the timing belts on a 2007 Cadillac CTS?

well really you cant change it the people that made them only change them like one or twice a year


How do you install a water pump on a 2001 cadillac deville?

The water pump is on the front of the engine, just under the top radiator hose. After removing the top hose and drive belts, the pump should be accessible to be unbolted and exchanged.


How do you change the belts on a 1974 C-10 with 350 4BBL?

Go to the parts store and get the belts then loosten the alternator, power steering pump and a/c compressor and remove the belts measuring them as they come off to see which belt goes where.


What are the different belts in Mazda mpv?

AC, alternator, power steering, and timing belts.


Can you by-pass the air pollution pump on a 1972 Cadillac Deville?

cut the belt and plug the holes in the block else it will smell like you are on fire. You can remove it, and route the belt or belts to run the other accesories. Or you can get the whole pulley system from a 1970 cadillac and it totally bypassis the smog pump and the put caps in the holes in the heads


If you drive with the power steering empty can it damage the belts?

Yes, if you drive with the power steering empty of fluid and the motor locks up, it can actually rip the belt from the motor. You can damage belts and the steering motor if you drive with the power steering empty.


How do you change the fan belts on a Chevy G30 van?

The ac, power steering and alternator will have separate tensioners (the units slide on a bracket to tighten) if they have separate belts. Loosen the units and the belts will come off. If a serpentine belt is used there only one tensioner.


How do you change the serpentine belt on a 2002 lancer?

Not a serpentine on mine. Mine is the 2.0L and it has 2 multi-groove belts. One for aircon/power steering other for alternator. Not a serpentine on mine. Mine is the 2.0L and it has 2 multi-groove belts. One for aircon/power steering other for alternator.


How do you replace the belt on power steering pump?

What have to do replace the belts water pump power steering