Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts.
Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
you will have to raise the motor up by taking the motor loose at the mounts just enough to get the oil pan off.
directions to change the motor mounts?
Carefully place a jack with a block of wood under the motor, loosen mounts from motor, jack motor up just enough to remove old mounts, replace mounts, lower motor onto new mounts, tighten motor to mounts. Make sure there aren't any hoses, wires, lines, etc. that may tear while lifting the motor.
how do you change motor mount on 2002 ford ranger
yes just have 302 motor mounts installed and proper drive shaft!
You have to remove the coil springs and there is an opening to get at them
A 5.0 liter engine will fit in a 1994 Ford Ranger with some modifications. The position of the transmission, motor mounts, and wiring will all need to be changed.
The 1997 Ford Taurus has for motor mounts and to transmission mounts. Worn motor mounts and transmission mounts will allow the engine and transmission to have movement.
they say you need to pull the motor to change the oil pan but if you just loosen the motor mounts and jack the motor up a few inches you can get to the oil pan bolts, remove them and lower the oil pan.
Any four liter engine should work in your 1994 Ford Ranger cup truck. The Ford four liter engine may need the motor mounts to be changed.
Torques motor 4.0 ford ranger?
http://mechanixtrix.com/Article/Article.aspx?ArticleId=10