The beams of a headlamp should not converge or diverge. Measure the distance between the headlamps, then mark that same distance on a wall in front of the car, ensuring that the marks are directly in front of the headlamp. Turn on the lamps and use the adjustment screws to the inside and top of the headlamp to direct the beam to the marks.
2 sliding bars hold headlight in remove and pull headlamp forward and out
To replace the front wheel bearing on a Ford Fiesta, you will need to remove the wheel. Then with a hammer you can pull the old bearing out.
Send me photos of the front and back of the headlamp to the email address on my bio page, and I'm pretty sure we can figure it out.
you need to remove the front fascia to remove the headlamp to change the bulb
The front bumper facia needs to be removed to access headlamp assemblies.
Standing in front of the bad headlamp, with the hood open, notice the two black tabs sticking up behind the headlamp assembly. These are locks that hold the headlamp assembly in place. Remove the locks by wiggling and pulling straight up. Now the headlamp assembly will drop out the front far enough to twist out the bulb socket to change the bulb. Reverse for installation.
The front for the light, on your Ford fiesta, can be changed by locating the fourth light connector on the back of the light. Push the connector in and turn at the same time. The fog light will come out.
setter or offside/rightside hitter
The 2013 Ford Fiesta has 52.7 in. of front shoulder room.
The 2014 Ford Fiesta has 42.2 in. of front leg room.
The 2011 Ford Fiesta has 52.7 in. of front shoulder room.