It is very easy to remove the motor/wiper assembly so do not hesitate to do so:
Remove the plastic covers off the wiper arm retaining nuts.
Remove the wiper arm nuts with a 13mm socket.
Twist and pull with your finger tips and finger nails at the base of the small rubber squirt tubing off the hard plastic squirt delivery tubes.
You may have to yard up and down on the wiper arms pretty hard to get them loose from their tapered shafts. Don't be a mindless gorilla but be brave and keep at it. They will come loose.
Remove the cowl cover by pulling or prying out the center of the six retaining push pins. Then lift the cowl cover up then out at a 45 degree angle. You will find the cover is a very tight fit between the right hand wiper shaft and the weatherstrip at the base of the windshield. Be brave and keep pulling and prying until it comes loose.
Reinstalling the cowl cover and getting the rubber weather strip over the cover is the hardest part of the whole job. Use putty knifes (slowly and carefully!) or a very small slender screwdriver. It took me half an hour just to do this part of the job that. ugh.
Remove the 3 bolts holding the wiper assembly.
Disconnect the electrical connector by squeezing the retaining tab that you cant see on the backside of the connector. You have to squeeze real hard.
Lift the wiper assembly out.
22 and 17
where is the location wiper motor Pontiac grand prix 2002
18'' and 22'' pretty sure.
chances its not the motor but the wiper module board located on the wiper motor. just remove the wiper motor and the module board is connected to it.
Wipers don't stick if it wont move that means the wiper motors have froze up as in quit working all you can do is try to get the wiper motor working by turning the wiper switch on and grab the wiper arm and try to move it up or down if that don't work remove the wiper arms then remove the cowl and replace the wiper motors
how do you change wiper motor on e250 1992 van
Please clarify or explain what you are trying to accomplish. There are no dip switch setting on that wiper motor that I have ever seen.
Just a guess - a pump for the wiper fluid?
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
how to change the windshield wiper motor in a 2000 jeep wrangler
Need to know what model Pontiac, it makes a difference.
Wiper arm travel rod from the wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.