Follow top radiator hose to engine block, thermostat assy is attached with two bolts. First drain radiator, release spring clamp on assy and remove hose. Remove serpentine belt from Power Steering unit, loosen power steering bolts and slide to extreme left. You now have access to both bolts, remove both bolts and thermostat assembly,. Clean engine mating surface, install new thermostat assy with new o ring ;reassemble and Add coolant.
How do you change the spark plugs on a 2002 chavy trailblazer
About 20 minutes
No. One of the two bolts that hold the thermostat housing to the engine is a challenge.
Engine thermostat is where your upper radiator hose hooks to the top of the engine
you cant change the front shocks on the trailblazer without a spring compressor because on a trailblazer they all have struts and they have to be compressed down
AnswerThe thermostat comes in a housing that bolts directly to the motor, and is located on the driver's side of the motor, about 1/2 way from the top, & towards the front of the engine. To remove/replace it you need a socket wrench & a 3 to 6 inch extension. You will have to remove the alternator and serpentine belt to get to it. This is where the thermostat is located on the trailblazer for years 2002 to 2004.
how do you change the thermostat on a 2002 ford zx2
It is not hard if you have the proper tools. Drain the radiator and remove the upper hose at the engine. Remove the thermostat housing and install the thermostat. Clean the surfaces and install the new thermostat.
see "how too replace water pump on 2002 Trailblazer"
engine oil leak
The MAP sensor on a Trailblazer is the Manifold Air Positioning sensor. It is located on the top of the engine.
sticking thermostat, fan clutch or waterpump. all have tell tale signs.