Disconnect battery. From underneath, disconnect the electrical wires from the starter solenoid. Remove starter bolts and the starter. Note the location of the spacer shims. Installation is the reverse of removal and make sure you replace the spacer shims so you wont have any screeching noise when starting. If you need more details, include the year and engine size of your camaro.
Lower rear end of engine
If you are referring to the starter solenoid then it is mounted on the starter.
I know the 1998 to 2002 camaro z28, ss have same ls1 engine as the corvette ls1. Only differets is horsepower. A pc program can change the horsepower to both camaro and corvette
How do you change the starter on a 1998 Honda Civic ex?
Not electronic. But mechanical yes. NOTE: a 1996 camaro has the LT1. A 1998 Camaro has the LS1. A lot of things are different.
The starter for a 1998 Cavalier is mounted on the side of the engine. It is at the rear, near the bottom.
To change the oil pan gasket u need to raise the engine about a foot in order to get to the oil pan .
You can find an engine diagram for a 3.8 v6 1998 Camaro in the owner's manual. You can also find it at select auto part stores.
The 1998 most likely has a Northstar engine. On this engine the starter is under the intake, and the intake has to come off for replacement.
where is the starter located on a 1998 dodge grand caravan *Added* All starters will be located on the flywheel, transmission housing, Usually on the bottom side of the engine. Its a large cylinder with a smaller cylinder on it, akathe Starter and starter solenoid.
yes
Should be at the lower rear end of the engine Remove the - battery cableRaise and support vehicleRemove wires from starter solenoid at top of starterRemove starter mounting boltsRemove starter