is it the bulb or head light unit if it is the unit lift the bonnet on the inside of the unit there is a spring clip lift and pull forward then disconnet the wiring
I just changed my bulb after much head scratchin....
Lift bonnet > locate lead going into the back of the main headlight > the leads go into small black connector block, gently dissconnect this by wiggling it from side to side and pulling, mine felt like it was welded in there so i just kept moving it... > this reveals the 3 metal connectors of the bulb > now take off the large black rubber that the three prongs are coming through, again mine was welded on and i forced it > bingo, the bloody bulb can now be easily removed and the new one replaced. > repeat process back to boot lock.insert key and watch the kettle boil...
Chat with our AI personalities