drop your tank and you will it..had mind changed last summer...$289. total..Ottawa Ontario
New AnswerActually, at least on US models , and 2 wheel drive, remove the center seat ( just unlatch it ) and set it somewhere safe. Then remove the sill plate and pull the carpet over to the driver's side. Carefully pull up the insulation on the floor and in the middle of the passenger side floor there is a plate held in with 4 screws with an "F" on it. The fuel pump is under that plate, in the fuel tank. Just disconnect the wire connections ( BATTERY DISCONNECTED , PLEASE !!) disconnect the 2 hoses and remove the 6 or 8 Phillips head screws. When you are done with whatever you need to do to the pump, reverse the order and put the car back together. Worked for me yesterday, cost of pump (28 sept 06) in AZ. 198.00
how to reset a fuel pump on a Mazda MPV van 2000
on an '01 Mazda MPV the fuel pump is on the left side of the vehicle. older MPVs have it on the right
Mounted on top and inside the fuel tank.
in the pump, which is in the tank.
inside the gas tank
The fuel pump is mounted on top and inside the fuel tank. The filter may be integrated into to fuel pump or it will be located between the fuel tank and the engine.
Fuel pump is in the gas tank,access from under the carpet behind the passenger seat
Fuel filter on Mazd MPV is located in the fuel tank.
I have a 90 MPV and also the shop manual (a real one) and I did not find a reset button in the manual or the vehicle. The later model MPV may have one.
how to change oil and filter on a mpv 2000 mazda
1990 Mazda MPV with 3.0 (V6) engine. The fuel pump is located under the middle seat. You have to remove the middle seat then lift up the carpet to access the access plate. Remove the access plate bolts to access the electric in-tank fuel pump.
How do you replace a fuel injector on a 2001 Mazda mp