If equipped it will display in the cluster.
To calibrate compass you need to drive two full 360 degrees turns and this will calibrate your compass. If the calibration is not successfully completed, then you have to go to dealer to install a magnetic plate to help calibration
It does not have a carburetor.
In most cases you press the reset button on the compass and then drive in circles (in a parking lot) while it calibrates.
What is the difference between a Dodge Journey SE and a Dodge Journey SXT
I would imagine you are trying to set the on board compass, these require to circle on full lock whilst they self calibrate.
Small magnets are rotated to "null out" local magnet fields so the compass will accurately align to magnetic North.
To calibrate the compass on an OnStar mirror, start by turning the ignition to the "On" position. Then, press and hold the compass calibration button located on the mirror until "CAL" or a direction (such as "N") appears on the display. Next, drive the vehicle in a circle at a speed of about 5 mph until the calibration is complete and the correct direction is displayed on the mirror.
The 2010 Dodge Journey has 16 valves.
The 2013 Dodge Journey has 16 valves.
The 2009 Dodge Journey has 16 valves.
The 2014 Dodge Journey has 16 valves.