At the base of the carburetor are 2 screws. One adjusts the idle speed and the other adjusts the idle mixture. Screw the idle mixture in until the engine starts missing then screw it out 1 turn. Then, adjust the idle speed screw to about 850 RPM.
On the driver's side of the F 150 carb, there should be the linkage for the throttle. On the linkage there should be a set screw that you can turn to adjust the engine idle.
You adjust idle with idle timing
Adjust idle on Mitsubishi diamante
how to adjust idle on 2001 legacy
you can adjust it via the idle control valve.
you cant adjust your idle, it is computer controlled
You do not adjust the Idle Air Control as it is controlled by the computor.
You dont adjust the Idle disconnect the battery for 10 mins and reconnect and the computer should relearn it idle .
adjust the idle screw on the drivers side of the throttle body turn it to the right to lower you idle turn to the left to raise it
You adjust the run and idle speed with the governor wire...loosen the nut and adjust it.
just take a look on the intake and you will find it on there somewheres