With a screw driver
To set the idle, adjust the carburetor.
With the engine at TOP DEAD CENTER (TDC) Adjust the exhuast valve to .007 and the intake to .005.
i think its 650 cc's. it also should say on the clutch covering by the oil cap. my manual says for an oil change is 21.98 oz.
I have a 2007 Yamaha TTR125L, and i am currently looking for Front forks for my bike also. A YZ125 front fork with triple clamps and all "should" fit all models of the TTR125, im hoping atleast. If your thinking of Re-doing the front end, the YZ125 is the best Choice. "NOTE" you will need a modified rear shock to balance out the setup of the front suspension or the bike will be unstable. YZ85 is to small, and YZ250 is probably to big. To be safe getting the front redone, install a stiffer shock(not just the spring) the whole shock, must be atleast 45% stiffer atleast!! Or take the bike to a shop, and get the rear shock redone, and modified for about $150 tops. Having a soft saggy rear setup with a stiffer MX style front is not safe!!!!
My kodiak 400 2003 idles well but when you throttle away it chugs like its no getting any fuel does any one have any clues
Alittle over 2.6 qts get 3 qts and you should be fine! Add, let engine run, check, adjust, repeat.
2003 YAMAHA WR450F
2003 yamaha
you cant adjust this.
its under the seat
2003