0
Add your answer:
Earn +20 pts
How do you adjust the idle on a 2001 Pontiac trans am?
You don't. If you are having an issue with idling check the IAC Valve.
Adjust idle speed on 1994 trans am?
the TPS (throttle position sensor) controls the idle.
Oil pressure at idle Pontiac trans am 1978?
What about it?, if it's 20 lbs. it's OK.
How would you adjust the idle on a 96' Pontiac Grand Am SE?
There is no way to adjust the idle as it is controled by the computor. You either have a idle control mod. bad or crankcase sensor. Talk to your parts store and they should be able to give you some advise also.
How do you adjust the emergency brake on a 2000 Pontiac grand am gt?
I have a 2000 pontiac grand am gt 3.4 auto trans with rear disc brakes how do i adjust the emergy brakes no adjustment under car how is is done?
How do you adjust timing on a 1985 Pontiac 305 when idle is off?
There is a idle screw on the throttle linkage on the carb that you can turn to increase the idle speed and then hook up your timing light to check the timing.
How does one adjust the idle on a 1988 Mitsubishi Mighty Max?
set the lever on the second highest step of the fast idle cam. measure the primary valve to throttle bore clearance, manual trans .031 inch autom trans .035 inch, if its off,adjust it whit the fast idle adjusting screw if you turn the screw clockwise the fast idle rpm increases,if you turn the screw counterclockwise the fast idle rpm decreases
How do you adjust idle on a 2000 Pontiac Sunfire?
There is an adjustment screw on the side of the throttle body that adjusts how open the throttle body sits.
How do you adjust a mercury 150 outboard boat motor idle?
You adjust idle with idle timing
How do you adjust idle in the Mitsubishi diamante?
Adjust idle on Mitsubishi diamante
Can I flat tow an 1989 Pontiac trans am?
The 1989 Pontiac trans am is a classic automobile. Yes, you can flat tow a 1989 Pontiac Trans Am.
What is the easiest way to adjust the valves on a 1978 Pontiac trans am with a 400 cid?
From the factory, Pontiac engines do not have adjustable valves. You simple torque them down to 20-25 foot pounds.
