After correcting the cause of the fault the vehicle must be driven above 40kph to reset the ABS warning light.
It is on because there is a problem with the abs system. Fix the problem and the abs light will reset itself. Have your local auto parts store read the codes for you.
have vehicle scanned with ABS scanner to determine the problem
Bring to a shop that has an ABS scanner to determine the problem
take off the ground from the battery then put it back
Disconnect the negative battery wire for about 15 minutes, then re-connect it. If your ABS is in working condition, it will reset.
It should reset by itself, unless there is a problem with the system. Have it checked or check the sensor.
Bring it to a shop that has an ABS scanner to determine the problem if any and if none clear codes
The abs light came on because there is a problem with the abs ( Anti-lock Brake System). The abs light will not reset until the problem has been fixed. Once the abs system is repaired the light will reset itself.
how to reset abs warning light on 2000 gmc Yukon
The ABS light on a 95 S10 Blazer has to be reset by a mechanic or the dealer. Unplugging the battery on the vehicle will not reset the ABS light.
if the abs light does not go off, try disconnecting battery for 5 minutes then reconnecting.this will usually reset computer.if this does not work, there is still a problem in brake system