if you have a ram air grand am do this, if no then just follow instructions after this. first take off the ram air cover that says ram air by Pontiac. should have like 6 plastic bushings holding it in place. after that's removed. look at the top of your headlights. on the left and right side of each headlight you will see a metal tab which must be pulled in a upward possition. i had to use a pair of pliers on mine. pull the two tabs up on each headlight then just pull the headlights out forward and there you go. when replacing the headlight make sure adjustment pins line up in the slot they go in and then push headlight in and push the tabs back down till they make a snap or locking noise. that's it
are you trying to change the entire headlight assembly? or just the bulb.
Did you ever find out how to change the headlight assembly? If so, please let me know how to do it :)
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.
What do you mean by headlight cover?What are you trying to do?JW
Not possible. You have to remove the whole light assembly.
There are bolts surrounding the headlamp. remove these and the wires.
The piece that a headlight assembly snaps into on a Jeep Grand Cherokee is called a headlight collar. It is also called a headlight assembly.
I'm trying to replace the headlight assembly for a 2000 Jeep Grand Cherokee Lerado. What bolts or screws do I remove
where is the headlight relay in a 1995 grand am
You need a 10MM socket. Open the hood, there are two bolts and a bracket that secure the headlamp. You remove the bolts and the headlamp comes out to access the bulbs.
There are bolts surrounding the headlamp. remove these and the wires.
headlight replacement how