there is a set screw on the linkage on the carb that will adjust it.
No you cannot set the timing it is controlled by the ECM.
The movie was set in Monte Carlo, so...
she was kissing her boy friend
If the speedo in an 04 Monte Carlo doesnot work it is the stepper motor in the cluster. Go to eBay 04 Monte Carlo cluster stepper motors scroll down and by a set of motors .INSTRUTIONS COME WITH THEM TO REPLACE THEM vERY SIMPLE TO DO SO.
The rev limiter is set to activate in park @ 4000 rpm. In R D or neutral the rev limiter is set at 6500 rpm.
Take it to an alignment specialist to get it set right.
how do I set reset ignition security on a 1999 z34 monte carlo
Not really possible. There is an idle speed control on most 1988 v6 machines. If you are experiencing high idle, it may be a broken ISC. The idle speed is controlled by computer. http://www.marksatterfield.com
A charger is hooked to a 98 Monte Carlo battery by attaching the positive lead to the positive battery post and the negative lead to a strong ground. The charger is set to the desired rate and plugged in.
she was homeschooled with demi lovato and on set but graduated in 2010 while filming Monte Carlo in Budapest
More than likely a carb problem or your timing is set too low.