You will have to remove starter, It is behind the starter in the block.
disconnect the battery, un bolt the starter and replace it then connect the battery
Drivers side mounted to bellhousing
Remanufactured starter and labor, aprox $250.00
5/8 in, 13mm
I changed my starter motor on my 1984 B2000 Pickup. Has to be done from underneath. Raise the front end - use jackstands. Remove the negative battery terminal. The holding bolts on the starter are difficult to reach and slow to remove but,with patience, can be done. Space around the motor is tight but with persistance, you can snake it out. Good Luck.
The bolts on the starter take a 5/8 inch wrench. The battery cable is a 13mm wrench.
its not that bad to bolts starter comes out disconect your battery first after the starter is down you will be able to take the to leads off the starter pretty easy job drive safe
Your 2000 Chevy pickup truck is 14 years old as of 2014.
its the big round thing on the transmission should be on the passenger side if not on the driver side w/2 bolds should be a 15 milimeter
The solenoid is on the starter.
It is on the starter.