answersLogoWhite

0


Best Answer

KEYLESS ENTRY SYSTEM

With the keyless entry keypad, you can:

• lock or unlock the vehicle doors

without using the key.

Your vehicle has a factory set 5 digit

code that operates the keyless entry

system. You can also program your

own 5 digit personal entry code. The factory-set code is located:

• on the owner's wallet card in the glove compartment

• or at your dealer.

When pressing the controls on the keyless entry keypad, press the

middle of the controls to ensure a good activation.

This system will disable the power door lock controls. These will not

work until the vehicle is disarmed.

Programming your own personal entry code

To program your own code:

5. Enter factory set code (keypad will illuminate when pressed).

6. Press 1/2 control within five seconds of step 1.

7. Enter your personal 5 digit code.

Enter each digit within five seconds

of previous one.

8. After the code is entered, the

locks will cycle, confirming that the

new code has been set.

Do not set a code that includes five of the same number or presents

them in sequential order. Thieves can easily figure out these types of

codes.

Your personal code does not replace the permanent code that the

dealership gave you. You can use either code to unlock your vehicle. If a

second personal code is entered, the module will erase the first personal

code in favor of the new code.

Locks and Security

149

Locks and Security

If you wish to erase your personal code, use the following instructions:

1. Enter factory set code.

2. Press 1/2 control and release.

The system will now only respond

to the factory set code.

Anti-scan feature

The anti-scan feature prevents

repeated attempts at arriving at a valid key code.

The keyless entry pad is disabled for 1 minute after 7 unsuccessful

attempts (35 consecutive button presses) at entering a valid key code.

The keypad will flash during this 1 minute mode. However, the 7/8 and

9/0 controls will still lock the vehicle.

Anti-scan will be turned off after:

• one minute of keypad inactivity.

• the remote entry transmitter UNLOCK button is pressed.

• the ignition is turned to the ON position.

Unlocking the doors with the keyless entry system

To unlock the driver door, enter either the factory set code or the

personal code (each digit must be pressed within five seconds of the

prior digit). The interior lamps will also illuminate.

To unlock all doors, enter the factory set code or personal code (driver

door unlocks) and press the 3/4 control within five seconds.

Locking the doors with the

keyless entry system

It is not necessary to enter the

factory or personal code prior to

locking all doors. To lock the doors:

• with the driver's door closed, press the 7/8 control and the 9/0 control

at the same time.

Locks and Security

150

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How can you change the keyless entry code for an expedition?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the keyless entry code on 1999 ford expedition?

The keyless entry code is located below the driver window on the exterior


How do you change the factory set keyless entry code on the computer module of your 2002 Eddie Bauer Ford Expedition?

You can not change the master code yourseft. Only the dealer can.


Door keyless code reset on 2003 ford expedition?

how do you get the entry codes for expedition eddie bower


What is the keypad code on the 1999 Ford Expedition?

Each vehicle with keyless entry has it's own factory code


How do you change the code on the outside keyless entry?

To change the code on an outer door keyless entry, refer to the ownerÍs manual for the car. There many different cars make and models and each brand can have a different process.


Where is the code located for keyless entry on 2003 ford expedition?

Answer 2003 expedition keyless entry locon my Eddie Bauer edition, its behind the glove box. Pull in the tabs on the side of the glove box & let the glove box drop down. In behind all the wires on the right side is a black box with a sticker on it with 5 numbers on it.This is your keyless entry code. P.S. You'll need a flashlite. JH


What is the keyless entry key pad entry code on a 2007 ford escape?

Each vehicle with keyless entry has its own factory code


Where is the keyless entry code located on a 2007 Lincoln MKX?

where can i find the master keyless entry code for a 2007 lincoln mkx


Trying to find the Keyless Entry code on a 2006 Ford Expedition?

on my 2003 expedition the code is located behind the access panel on the passenger side floor board where the fuse box is it is a 5 digit number.


Where to find the keyless entry code on 2010 ford sport trac?

Where to locate keyless entry code on 2010 ford sport trac


How do you reset the computer module on the 2000 Eddie Bauer expedition to retrieve code for keyless entry?

It should be on the keyless entry control module behind the fuse box (below steering column) on the firewall. It's a five digit number 1xxxx.


Where is the keyless entry key pad entry code on a 2008 Ford Escape?

How do I recover a lost Keyless Entry Code on a 2008 Ford Escape Limited? Above is NOT an answer ! Hello ?!