Stock, with no modifications. 235/75R15. However, there are other options for those interested...
I have had many Trackers/Sidekicks. With a couple hours work, you can cut about 1 1/2" from the lip of each fender, and hammer in your fender wells. You'd be surprised how most of those indentations don't have any real purpose. I've cleared 31x10.5 with that simple mod.
If you don't want to do any cutting, then at minimum you will need to purchase some longer springs and long travel shocks. That alone is going to run you about $500+, and will likely only give you about 2", and you can fit 31x10.5, maybe 32's with some fender hammering.
You can also go the package route, calmini, old man emu, etc. Spend about $800-$1000 and get yourself a 3"-5" lift. Then no hammering or cutting required, 32's will fit no problem.
Yes. You'll need a sawzall and a big hammer.
Hi, The tank is 11.1 Gal. Steve H.
no infact there are vast differences by year 8v or 16v motor Federal exh California exh. and in 1999 , is a big generational change. NO. and the system also includes the exh manifold, and is unique all engine. and calif and fed cars.
31" x 10.5"... would recommend at least a small lift to the truck if you plan on bouncing around at all... they should be fine on road unless you happen to smoke a big pothole. Regards Josh Marshall
There should be a cap on the back of your engine above the transmission, in big bold letters is the word oil, twist and fill. :)
p275-16s are near the limit. You'll have to gear down your front and rear diff, otherwise the big tires will bog you down on the highway.
It is how big you want your tire to be its to big or to wide.
a 295 is a 34' tire
Two things could cause the tire to make a noise sounding like a flat tire even though the tire is fully inflated. First, if the tire has a big enough flat spot on the tread surface and second if the radial plies in the tire have separated letting air between the belts causing patches of the tread surface to bulge.Answeri test drove a geo that had loose lug nits on it that made a noise like that
YES! He's at Big Foot in the epf HQ mail me at thatmailgirl@aol.com so I can give u the tracker
17 gallons
the weight lifting machines