Wiki User
∙ 14y agoThe turn signal relay and hazard relay may need to be replaced, see your dealer
You may have a short.
Wiki User
∙ 14y agoCheck the high-low beam switch on the floor. The connections behind the switch get corroded/rusty.
blown relay to the drivers side door panel, or severed/corroded wire.
Could be,Battery failure, Loose or corroded battery connections, Starter relay failure, Starter failure, Starter solenoid failure, Neutral safety switch broken or out of adjustment,
Could be,Battery failure, Loose or corroded battery connections, Starter relay failure, Starter failure, Starter solenoid failure, Neutral safety switch broken or out of adjustment,
The most common cause of taillights and â?? lights not working is a bad ground wire. The ground wire may be broken or the connection is corroded.
Bulbs blown, or corroded sockets.
blug something into it
The heated mirror may not be working due to a blown fuse, a faulty mirror heating element, or a wiring issue. It is recommended to check the fuse first, then inspect the mirror heating element for any damage, and finally, ensure the wiring connections are secure and not corroded. If troubleshooting doesn't resolve the issue, it may require professional intervention.
Defective, corroded, or loose battery cable.
Bad bulbs? Sockets corroded?
I got a new battery for the engine and my remote quit working.
1. Have you made sure that all connections work to the said printer? Maybe you have a bad cord connecting the printer to the computer? 2. Make sure all drivers are updated and that your printer is compatible with your brand of computer.