With door open, support with wood blocks, un bolt, and i believe there is 1 bolt from the inside, replace and it is good to have another person steady the door while you bolt the new one on. The doors are heavy and they always break the hinges.
You can't. Have to replace the hinge.
The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off.
You replace The hinge pins
To replace the Ford Explorer rear window hinge, you have to buy a similar window hinge. Use a screwdriver to open the hinge and replace the hinge but fitting it in the window.
I need passenger door hinges for my chevy aveo 2007
look at the hinge on the drivers side or passenger side of your trunk lid should be on a white sticker.
To replace the hinge on a 95 Mercury Cougar, remove the bolts holding the hinge in place. Find a replacement hinge from the manufacturer and install it using the right hardware.
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird.
Broken off the door or from main body? Main body- Prefabricate. Door- replace door.
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
It is on the left hinge of the trunk
THERE IS A CHANCE IF THE DOME LIGHT IS STAYING ON IT IS NOT THE THE DOOR SWITCH, BUT WORN DOOR HINGE BUSHINGS,