To change the license plate light on a 1998 Chevy Cavalier, reach up under the bumper and remove the bulb over the license plate. Then put a new bulb in the socket. The bulb can also be accessed by removing the lens on the outside, but there are screws to remove first.
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
their are 4 plastic nuts in the trunk that loosen the light assembly that the lights are in. Remove those and pull the assembly out and twist the connector for the license plate light to access the bulb.
yes there is, just above rear plate.
yes it was
how to change 2005 equinox license plate light i removed the screws but it didn't release
Added to that, and assuming that you're asking because your license plate light is out, and because the fuse is the same fuse for the tail lights, then the problem is not the fuse. It's the license plate light itself. === It should be the same fuse as the taillights.
I had to open my trunk, look inside and find butterfly/thumb screws. I un-fastened them and dropped down the entire light bank including the licence plate. One big strip. You can then access the lights from the back of the strip.
no.
fuse box location
take off the license plate then screw the holder on with the plate.
this light is called the license plate light