Look at the crankshaft pulley, it is right there.
The cam sensor is inside the distributor on a Dodge 5.2L.
Do nothing. There was no such thing in 1967.
ramdom much
The 2002 Dodge Ram 150 came equipped in 8 powertrain options, each with different configurations. The Ram 1500 with the 5. 9L V8 has a crankshaft position sensor (qty 1) with part number Delphi #SS10127.
The 1997 dodge ram doesn't have adjuastable timing if the. The timing is controled by a crankshaft sensor near the transmission bell housing and a cam position sensor in the distributor. the cam position sensor is uned mostly for fuel injection syncronization. The crankshaft position sensor mainly controls ignition timing and is not moveable/adjustable.
The tach signal comes out of the pcm. The pcm watches the crankshaft position sensor to calculate engine speed. The crankshaft position sensor is behind the starter.
The crankshaft position sensor on the V 8 is behind the passenger side cylinder head, mounted through the transmission bell housing. The crankshaft position sensor on the diesel is mounted on the front of the engine, pointed at the crank pulley.
the crankshaft position sensor is located in between engine and trans passenger side. it easy to change . It is in the top of the bell housing on the pass side, under the trans dipstick tube.
The crankshaft position sensor on a 5.2L is behind the passenger side cylinder head, through the top of the transmission bell housing.
The camshaft position sensor on a 2001 Dodge Ram 5.2 is inside the distributor, under the rotor.
On a 2007 Ram the throttle position sensor is part of the throttle body.