Remove all the screws, take the arm rest off, and lift.
The 1985 Chevrolet Corvette rocker arms will have an adjustment screw on top of each rocker arm. Turning the adjustment screw will change the height of the rocker arm.
Drain the water from your 1972 Chevy Corvette radiator. Remove the radiator hoses. Remove the stabilizing arm retaining bolt. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
Arm, (Arm rest) Leg, (Leg rest)
I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.
I had issues with the arm rest coming loose and wobbling and I ended up removing the driver side arm rest and the passenger side arm rest and swapping the two. To remove the arm rest, peel back the velcro at the base of the arm rest, peeling back the cover and revealing the bolt. Then, simply loosen the bolt using a Torx bit size T60 I believe, and that should remove the arm rest.
check catalytic converter , might be partially clogged
You ,don't just live with it...
Flip up the cover on the end of the arm and undo the 12 mm nut. Pry the arm off the wiper motor shaft and simply press new one on. Be careful to align the arm a little past the wiper arm rest and tighten.
on the end that attaches to the side of the back rest there is a zipper. open the zipper, then you can tighten the bolt that holds the arm rest in place. takes about 30 mins & your done. Make sure the arm rest is where you want it as you tighten the bolt.
Drain the water from your Corvette radiator. Remove the radiator hoses. Remove the radiator stabilizing arm bolt. Remove the radiator retaining bolts. The radiator will come off.
It means his arm is tired and you're the closest arm rest.