Yep, this is a hard one to find. It is located BEHIND THE CENTER OF INSTRUMENT PANEL.
The 1997 Oldsmobile Aurora flasher fuse can be found in the fuse box. The fuse box is in the engine compartment. The location of the fuse will be listed on the inside cover of the fuse box.
remove the lowest panel on the dash ( the one under the steering wheel) the relays are under the radio there are 2 one for the blinkers and one for the emergency light.
The 2002 Oldsmobile computer is located behind the passenger side dashboard. You will need to remove the passenger side kick plate in order to access the computer.
Turn signal flasher is under the dashboard beside the steering column. Flasher unit for the emergency flashers is on the other side of the steering column.
You have two places to look for your Flasher relay. Start under the hood on the drivers side there is a Black Box open it and look inside there should be a label telling you what each one is. The Other is under the dash and will require some effert to locate. Suggest you have the replacement in hand to help you locate it. Hope This Helps. Oilman
Good day: I have pulled the front shroud off of my 95 acura legend again. Now I have no turn signals (front or rear). I cannot seem to locate the flasher with on line pictures. CAN YOU HELP ME WITH IDEAS OF BETTER PICTURE OF FLASHER LOCATION?
its above the steering column inside the dash.
To change the license plate lamp on a 1998 Bravada, locate the bulb. Visit an auto parts store to obtain the exact bulb and screw it in place.
The flasher is located under the left side of the dash fjust forward of fuse panel. Probably have to use "feel" to locate it. The flasher closer to the steering column is the Hazard flasher.
To replace the flasher on a VW Beetle, locate the flasher under the dash on the driver's side. Remove the old flasher and replace with a new one. This is not a fuse, but a three prong plug in that looks like a small cylinder.
locate it by turning on your emergency flashers and listening for the click. once you find the unit that is clicking, you have found the flasher unit
Locate the flasher control switch and turn it off.