0
Yes if you were to put in a one ton rear end for the longer wheel studs and bolt patterns. But it would make no sense to do so if you do not have a one ton frame, no real use for it if your frame drive train and braking is not good enough for hauling more weight.
Add your answer:
Earn +20 pts
Do dually trucks come in a 6 ft bed?
Gm does not make a SB dually truck. The only that I am aware of is the Dodge Megacab and it can be had with a dual rearend.
WHAT is the name of the pickup truck that dodge makes?
they make a Dodge Dakota, witch is a very small pickup and a Dodge Ram that is a little bigger than the Dakota and you can get in flatbed and dually, witch you cannot get with a Dakota
Can a dodge 2500 be turned into a dually?
Yes. Your best bet is to get an axle out of a dually from the same year. If you can get the drive shaft and springs as well. Many 2500's have a Dana 70, while the 3500 has a Dana 80. This will make your drive shaft too long. We just did this and found out the hard way. You will also need an extension on the parking brake cable. The dually fenders are just a bolt on part.
What other make of wheel fits a Geo Tracker?
F150 and dodge 1500
Does Chevy make a dually with a flatbed?
Chevy does make a dually with a flatbed. It's called the Silverado. You can find a Silverado at your local Chevy dealership or online at the Chevy website.
Did gm make a 1996 Chevy dually with a 350?
yes
1998 dodge stratus make humming sound on drivers side?
wheel bearing
Does Chevrolet make a Silverado Chevy Dually?
"Chevrolet does make a Silverado Chevrolet Dually. You can find images of different Duallys online and as well as to search for one, you can contact your local dealership."
How do you change rotors on 2005 dodge ram 3500?
front or rear rotors? front will come off easily when you remove wheel and caliper. rear will come off after removal of wheel and caliper with the aid of a hammer or a puller there are also a couple of clips on the wheel studs against the rotar.these can be removed witha screwdriver.usually you need to replace these clips as you trash em taking them off With all do respect, the above is not true for the rear rotors of the dually. Removal of the wheel, caliper, caliper bracket, as well as the axle are required. Its really not as bad as it sounds. Just eight extra bolts for the axle, and eight more for the dually "adapter". Just make sure you top off the rear diff fluid when you finish up (in case some spilled when you slid the axle out)
Do they make a four wheel driver Dodge Charger 2005-2010?
4 wheel drive, no. All-wheel drive is an option in the newer chargers (i think it was first an option in the 2009s)
How do you remove wheel bearing on dodge?
Not enough info to answer. Please ask a new question and include the year, make, and model.
Did dodge make a 1997 Dakota with automatic transmission with 3.9 L V6?
Yes, i guess they did there is a transmission on craigslist right now for that truck. I am not sure if it is for wheel drive or rear wheel.
