You will have to replace the entire motor mount.
Dodge doesn't sell the bushings separately, so the entire assembly needs replaced unless you can find them in the aftermarket.Dodge doesn't sell the bushings separately, so the entire assembly needs replaced unless you can find them in the aftermarket.
The transmission is controlled by the engine computer. It can be replaced.
http://forum.chryslerminivan.net/ This forum has lots of info pertaining to the Dodge/Chrysler vans.
how do you replace a wiper control module in dodge 1998
Yes, as a mechanic at a Dodge dealer I have replaced a few of them.Yes, as a mechanic at a Dodge dealer I have replaced a few of them.
Yes, but be aware that if you are not a ASE certified mechanic or have one that you trust...I wouldn't do it. Of course you can go out and buy the bushings, which is cheaper, but unless you have a good mechanic...I wouldn't recommend it. Iam doing the same thing right now with my 2001 neon. And I just bought the whole control arms. Cause the control arms consists of the bushings and the ball joints. So its good just to replace the whole thing. But if your looking for the cheaper option, then that's one to go with. But as I said, be aware that the bushings can be destroyed when trying to install the new ones, if your not careful. Good Luck! (Note: If your wanting to know the price of a whole control arm...its $99 at autozone or you can buy some refurbed control arms for about $65. each.)
No, it shouldn't make any kind of peculiar noise at all.
the ignition timing does not get replaced on 87 dodge.
A 1999 Dodge Ram does not have a water control valve.
When the sway bar try's to do it's job without the bushings then it will come in contact with the body of the car and will be an confortable ride that could causes more problems in the future.
The computer needs replaced.