---------------------------------------------------------- The camshaft positioning sensor is hidden behind the starter motor on the 3.5 6-cyl. engine. I think it's the same for the 4.0. The starter motor must be removed to replace the sensor.
For 3.5l, remove starter.
on a 5.3L it is behind the starter that must be removed first
It's right in front of the starter up against the firewall. You have to take the starter off.
The 2003 Saturn L200 has a camshaft position sensor. It is located on the bottom front of engine behind the Starter. You will need to remove the two bolts that are holding the Starter to get to the sensor.
Is there a picture of a Starter Solenoid for a Oldsmobile 1992
It is located above the starter. you must remove the starter for access. Make sure you disconnect the battery first.
Where is the starter relay located on the 1996 Oldsmobile 88?
It's behind the starter. I found this on a search look here . http://thecommi.angelfire.com/index.html
Remove one battery post. Find the starter and remove the wire connectors - after marking where they are to be reinstalled on the new starter. Remove bolts from starter and install new sarter in the same position Reconnect the electrical connections.
Show me a diagram of the starter location on a 1999 Oldsmobile Alero
The 1997 Oldsmobile starter relay switch can be found in the fuse box. The starter relay switch will be at the top of the third column.