Your 2000 Chevy Blazer air-conditioning bracket is held in place with for retaining bolts. Remove the retaining bolts with a 9/16 socket. The air-conditioning bracket will come off.
r-134A
mounted next to the ing coil on the same bracket
Into the low side service port.
The relay is attached to the bracket that holds the wiper motor to the hatch.
It can be either and is located on the left of the steering column sometimes mounted on a bracket.
With Air Conditioning or without? It makes a difference.
Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.
Assuming this is a 4+4 vehicle, the caliper bolts on to the caliper bracket. The caliper bracket bolts on to the steering knuckle.
Connect your Freon bottle to the low pressure port on your 1998 Chevy S 10 Blazer air conditioning compressor. Discharge the Freon into the compressor. A recharge kit will make this process quite simple.
i HAD TO REPLACE THE TURN SIGNAL SWITCH IN MY 96 BLAZER IT WAS HARD TO FIND BUT I HAD TO REMOVE THE PANEL UNDER THE DASH from drivers door over to the ash tray. to the right of the steering wheel will be a metal bracket behind that bracket was to fuses it was the one left hope this helps.
Yes.
can I put a 99 Chevy 4l60e transmission in my 86 k5 chevy blazer