0
a little aquarium water-pump, pumping water through a long closed loop of glass tube
so that the same water goes around and around, with a set of short glass tubes of
different inside diameters that can be installed into the loop, and maybe some kind of
spinning indicator inside the pump or the tube to show how much water is flowing
Add your answer:
Earn +20 pts
How do i use a model of Electricity to describe the energy transfers in a circuit?
In a circuit, electrical energy is transferred from a power source (such as a battery) to the components (such as resistors, capacitors, and light bulbs) through the flow of electrons. The model of electricity, based on Ohm's Law and Kirchhoff's Laws, can be used to describe how energy is transferred as electrical current flows through the circuit and encounters resistance, voltage drops, and power dissipation. By calculating the power consumed by each component in the circuit, you can better understand how energy is transferred and transformed within the system.
Will Homeline Circuit breakers fit in Siemens Electrical panel?
No, Homeline circuit breakers are designed for Square D electrical panels and are not compatible with Siemens electrical panels. It is important to use circuit breakers specifically designed for the brand and model of your electrical panel to ensure proper fit and function.
Why is a boiler and pump a model in a circuit?
A boiler and pump can be represented as a model in a circuit to simulate how they interact electrically and control the flow of fluids in a system. By modeling them in a circuit, engineers can analyze the performance of the overall system, understand how the components affect each other, and optimize their operation for efficiency and reliability.
What is ammeter used for?
An ammeter measures the electrical current in something. A digital one is calibrated to display through the shunt and convert information from the analog model.
Kenmore refrigerators what is the electrical requirements when roughing a house?
The electrical requirements for a Kenmore refrigerator when roughing a house typically include a dedicated 15-20 amp circuit with a standard three-pronged electrical outlet. It's important to have proper grounding and polarity for safety and performance. Always refer to the specific model's installation guide for detailed electrical requirements.
What is ebers moll model?
It is a model for the equivalent circuit of a Transistor.
What types of math is used on an electrical engineer's job how are they used and why are they used?
Math is a way of modeling circuits. Once you have a mathematical model of a circuit, you can start to vary the math which is much easier than building the circuit and varying the hardware. Today, computers do much of the math.
Where are the circuit breakers located on a 2002 coachman santara?
The circuit breakers on a 2002 Coachman Santara are typically located in the electrical panel, which is commonly found inside the RV. It is usually near the kitchen area or inside a cabinet. Consult your owner's manual for the specific location in your model.
How is the central heating model not like an electric circuit?
How is the central heating model not like an electric circuit?
How is the model not like an electric circuit?
how its the same
What is R model of a circuit?
bta do koi
What is the Difference between network and circuit?
An electrical network is an interconnection of electrical components (e.g. batteries, resistors, inductors, capacitors, switches) or a model of such an interconnection, consisting of electrical elements (e.g. voltage sources, current sources, resistances, inductances, capacitances). An electrical circuit is a network consisting of a closed loop, giving a return path for the current.An electric circuit is a path in which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. The point where those electrons enter an electrical circuit is called the "source" of electrons. The point where the electrons leave an electrical circuit is called the "return" or "earth ground". The exit point is called the "return" because electrons always end up at the source when they complete the path of an electrical circuit. The part of an electrical circuit that is between the electrons' starting point and the point where they return to the source is called an electrical circuit's "load". The load of an electrical circuit may be as simple as those that power electrical appliances like refrigerators, televisions, or lamps or more complicated, such as the load on the output of a hydroelectric power generating station.
