so what do i do if my blinkers do not when the lights are on
They dont work. The bulbs are the most problems. Fix it!
the hazard switch has two sets of contacts. when hazards turned on, blinkers cannot work,even if hazards dont work.for blinkers to work, hazard sw must be in off position-this reconnects blinker circuits to work normally. BUT-the contacts in the hazard sw get dirty and wont reconnect the blinkers to work
If both blinker and hazards dont work check your flasher switch.
Blown fuse, or defective flasher relay if all the bulbs are good.
what can be wrong with the blinkers in a 1994 grand am?
The blinkers don't work because your car needs a new flasher relay.
Why do the blinkers not work on a 1992 Harley Fatboy Bike
If the bike came out with blinkers , they have be on the bike and work .
there are 2 flasher cans in vehicle.one operates hazards and the other operates the blinkers. change the one that operates the blinkers and your blinkers will work
probably the blinker relay, believe this is located on the left side behind the fairing cover
sounds like an intermittent ground fault. the best place to start is the bulb to check the connections. It may have become loose or corroded. If that is not the problem check the ground wire for the blinkers. same reason. The other thing to check for is a weak relay. The location of the relay should be in the owners manual. hope it helps. duboff