The following was sourced and paraphrased from Haynes Repair Manual for 1987 - 1996 Dodge Dakotas.
For 4wd models; The hub and bearing assembly is a sealed unit and is not serviceable. If it is found to be defective, it must be replaced as a unit:
For 2wd models using repackable, tapered-type bearings and cotter pin/nut lock type retainers:
The spindle nut is to be tightened in the following steps:
Wiki User
∙ 13y agohow do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
Yes.
Wheel bearing?
1 1/2
They are a sealed bearing and are not "packable".
locked-up wheel bearing or one that is about to lock-up.
Check the wheel bearing.
Yes
You can't, it is a sealed wheel bearing.
spec calls for 185 foot pounds of torque, with a new nut.
2wd is 185 ft lbs 4wd is 173 ft lbs
Begin by removing the tire and wheel from your 2002 Dodge. Remove the end of the axle. Remove the wheel bearing nuts. Remove the wheel bearing. Reverse the process to install your new wheel bearing.