firing order, 1, 2, 3, 4, 5, 6. Dist rotation, clockwise.
18436572 clockwise.
What is the firing order of a 1983 Jaguar XJ6 dist. cap order. Its 1,5,3,6,2,4 if my memory works.
the firing order 1-8-4-3-6-5-7-2. okay this is the way i set mines. on the dist. the number 1 plug terminal (should be facing the cyl. bore number one) then from there go clockwise in the firing order. another way is to look at the dist rotor when the number 1 cyl. is in top dead center(be careful there are two top dead centers for ever dist. rotation). when you have the right top dead center then go by the dist. rotor to which every dist. plug terminal the dist. rotor points to, that would be number one plug wire then go clockwise in firing order.
If it has a 5.7L engine in it, they are ALL the same firing order. 1-8-4-3-6-5-7-2 1-8-7-2-6-5-4-3 is for a 6.0L and a 5.3L what num. sparkplug wire go to the dist. cap num.
the firing order is 1-8-4-3-6-5-7-2. Number one cylinder on the cap should be slightly to the right of center on the front of the dist cap. Firing order will go in a clockwise motion around the cap. CYLINDERS 8 7 6 5 4 3 2 1 front of car
1-6-2-4-3-5 its is a counter clockwise firing dist.
1-8-4-3-6-5-7-2 with 1-3-5-7 on the drivers side. The dist turns clockwise.
The firing order on a 2.5 Pontiac motor is 1-3-4-2, 1 being in front. The chilton book shows the firing order and the wire placement on the dist cap. #1 is at 10 oclock.
The firing order is 153624 #1ON DIST-CAP IS JUST AFTER LOCKING SCREW FERVEST FROM THE CYLINDER HEAD.
18436572 dist rotation is clockwise
1-5-3-6-2-4