0
Add your answer:
Earn +20 pts
What is the movable horizontal piece on the tail of the airplane?
radar
Which homograph means movable and a piece of artwork suspended in air?
Mobile means both movable and a piece of artwork suspended in air. They are homographs with the same spelling, but different pronunciations and meanings.
How do you put horizontal in a sentence?
The pencil lay horizontal to the piece of paper.
Is there an airplane tail without a stabeliser?
Most airplanes have fixed tail surfaces known as either a horizontal stabilizer or vertical stabilizer. The horizontal stabilizer has an attached moveable surface called an elevator while the vertical stabilizer has an attached moveable surface called a rudder. On certain airplane models, such as the Piper Cherokee or Cessna Cardinal, the entire horizontal tail is a one-piece surface that rotates and performs the function of both the horizontal stabilizer and elevator. Combining the words stabilizer and elevator, this type of control is known as a stabilator. Elevators, stabilators, and rudders, generally have another small moveable control piece on the trailing edge known as a trim tab. Most trim tabs can be adjusted by the pilot in flight to cause the control surface, to which it is attached, to stay slightly deflected in a particular direction, relieving the pilot of having to apply control forces during stabilized flight. Some trim tabs, such as rudder trim tabs on many small airplanes, must be adjusted on the ground and cannot be adjusted in flight. Some airplane designs do not require any stabilizers or control surfaces on the tail. The canard design places a horizontal stabilizer and elevator, or a stabilator, near the front of the airplane and vertical stabilizers and rudders on the tips of the main wing. The main wing is located near the rear of the airplane. The canard design is more efficient in flight than a conventional airplane design, since both the wing and horizontal stabilizer produce lift in flight. In a conventional airplane design, with stabilizers on the tail, the horizontal stabilizer produces a downward force during flight to provide stability, reducing the overall efficiency.
What was the top of the door called where the blood was to be spread during the passover?
Lintel. In Hebrew it is called משקוף - Mashkoaf.Answer 2The top piece of the frame is called a header. The lintel is the support structural piece to which the top of the frame is secured. The top horizontal piece of the door itself is also called the door header.
What is a flat movable piece hinged to the rear of a ship for steering?
answeres does not know
What is the beam over a door called?
The beam over a door is typically called a lintel. It is a horizontal support element that helps distribute the weight of the structure above the door opening.
What is a plane?
A plane has several quite different meanings. A plane isA tree, otherwise known as a SycamoreA flat surface, more often conceptual than physicalA tool for smoothing a piece of woodOne of the lifting surfaces of an airplane - usually the tail-plane (aka horizontal stabiliser) or the wing (sometimes called main-plane)A level of thought or existenceA short form of airplane (q.v.). Strictly this one should be written 'plane not plane.
What is noggin as in building?
A noggin is a piece of horizontal timber, although it usually refers to the top piece of a frame that forms a panel.
Was there ever a plane monopoly piece?
yes there is a here and now series and there was a airplane in the series
What is the rubber piece called that is found on the lower horizontal part of car door frames - you step over it as you climb into the car- Usually have the logo on them and they collect a lot of dirt?
this is called the door sill seal or door sill rubber
How do you measure from micrometer of dia?
Put it between two jaw piece micrometer. Screw close movable jaw. And read on a micrometer ruler.
