repair ice maker
how to repair kenmore ice maker
It is possibly to repair your ice maker. Be careful of unattaching any hoses and check for hairline cracks in the hardware. Worst case scenario you have to call the technician afterward, but it doesn't hurt to try to fix it yourself first.
There are do-it-yourself guides online like FixIt.com that help you learn how to repair an ice maker yourself. However, it is advised that you really know your tools and what you're getting yourself into before you dive in and actually create a worse problem than it was. I suggest just hiring a repairman, but if you believe you can fix it yourself, then make sure you use some guide found online.
If you have already tried adjusting the temp controls the problem is likely a defrost control that is stuck in the "On" position. It is operated by the same timer as the ice maker. This is not a do-it-yourself repair.
need model of ice maker.
If your ice maker is producing only two cubes at a time, it could be due to a low water flow to the ice maker, a malfunctioning ice maker module, or a problem with the water inlet valve. You may need to have a technician inspect and repair the ice maker to determine the exact cause of the issue.
If this question is asking about an ice maker installed in the freezer section of a refrigerator, new OEM replacements can be found on-line for $70. Replacing the entire unit is fairly straightforward.
how to get the ice in a maker to drop
Check the water solenoid valves. On our Kenmore the valves had begun to stick causing the ice maker to fail as it is a timed cycle to fill the tray.
The automatic ice maker has a bale wire that detects if there is ice in the bucket. If it is full, the ice maker turns off.
ice maker has stopped working for a ge