0
Add your answer:
Earn +20 pts
Why should lens paper only be used once?
lens paper is fragile
What unit of measure should be use to find the distance around the handkerchief?
A ruler should be used to measure it. Once you have the perimeter, it would probably be most convenient to express it in terms of either inches or centimeters.
How do you unstick duct tape?
i had this problem once. But if its not paper, you can use some microwaved baby oil. it works like a charm!
What happened to the paper spiral when you turned the heat off How can you explain this?
The paper spiral turns due to the heat rising (thermal) from below. Once the heat is turned off, there is no longer a thermal to turn the spiral, so the spiral ceases to turn.
A convex lens like that of the eye produces an image that is upside down and reversed from left to right?
Because that is how the brain is organised. Once it is processed, the brain knows what way the image should be. While your eyes' lenses may create an inverted (upside down) image, the brain corrects this automatically, so there is no "upside-down" to be noticed.
Why should lens paper only be used once?
lens paper is fragile
Why should you only use a piece of paper lens once?
http://wiki.answers.com/Q/Why_should_you_use_a_piece_of_lens_paper_only_once"
Is a double convex lens converging lens?
Yes converging lens. The power of the lens is given by reciprocal of its focal length. Moreover the power for converging action is +ve. So as we place two converging lenses ie convex lenses, then we have to add the powers. Once again the power becomes +ve. So converging action is definite.
Why does a piece of paper begin to burn when it is put under a magnifying lens for sometime?
When the paper is placed under a magnifying lens, the lens focuses light onto a small spot, raising the temperature. This concentrated heat causes the paper to reach its ignition point, leading to combustion and burning of the paper.
How do you replace front blinker bulb 1992 accord?
Open Hood, Remove single screw from top of Blinker or Marker Light. Once Removed slowly pull lens out and you should be able to get to bulbs from there once you turn connectors and remove from Lens Assy
Why should you use lens peper only once?
The solution impregnated in lens papers will evaporate, so it is best to use a fresh sheet each time, and keep the remaining sheets well sealed when not in use.
How do you get your board of studies student number?
Once you get your school certificate there should be a student number on the paper.
When should you use scanning lens on the microscope?
You should use a scanning lens on the microscope when you want to quickly locate and focus on your specimen at low magnification. The scanning lens typically has the lowest magnification (4x) and widest field of view, making it easy to scan the slide for the area of interest.
When beginning to focus a microscope what lens should you use?
You should start by using the lowest power objective lens, usually the 4x or 10x objective, to locate and center the specimen on the slide. Once the specimen is in focus, you can switch to higher magnifications for more detailed viewing.
What are the release dates for Independent Lens - 1999 For Once in My Life 12-12?
Independent Lens - 1999 For Once in My Life 12-12 was released on: USA: 1 February 2011
What lens should be used when beginning to focus?
To begin focusing, start with a standard lens such as a 50mm or 35mm lens. These lenses offer a versatile focal length that can be used for a variety of subjects and shooting scenarios. Once you feel comfortable with focusing techniques, you can explore other lenses based on your specific photography needs.
How do you install strike oakley lenses?
into an M-frame? pull the center of the original lens out of the frame from the center, around where the nose piece is. it should come out straight away. to fit a new one in, work the new lens in from the sides of the frame, left and right, once they are in, pop the center of the lens into the frame. et voila.
