The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.
ohms law.
In series like so ---6 ohms ---- 12 ohms --- , the total resistance is just 6 ohms + 12 ohms.assuming you mean in parallel like this:_|---6 ohms-----|-|~|-_|---12 ohms---|then the resistance of this can be calculated like so:1/6 ohms + 1/12 ohms = 1/R (where R is the resistance of the circuit as a whole)2/12 ohms + 1/12 ohms = 1/R3/12 ohms = 1/R1/4 ohms = 1/Rso R = 4 ohmsA few notes, if the resistors are in parallel the total resistance will always be less than or equal to the lowest resistance in parallel (i.e 6 ohms in parallel with 12 ohms will have resistance less than 6 ohms).Also if two resistances in parallel are the same, then the resistance is half of the resistance of both resistors (i.e. 1/2 ohms + 1/2 ohms = 1/R; 1 = 1/R, R=1 ohm which is half of 2 ohms).This process can be extended to 2 or more resistors in parallel.i.e if we had a 6 ohm, 6 ohm and 12 ohm resistor in parallel we could go1/6 ohms + 1/6 ohms + 1/12 ohms = 1/R(1/6 ohms + 1/6 ohms) + 1/12 ohms = 1/R1/3 ohms + 1/12 ohms = 1/R4/12ohms + 1/12 ohms = 1/R5/12 ohms = 1/Rso R = 12/5 ohms or 2.4 ohms
yes.
The answer is .047Megohms. 1kilo ohm is 1,000 ohms. 1mega ohm is 1,000,000 ohms. Just move the decimal over to convert.
The unit of Ohms was named after the German physicist Georg Simon Ohm, known for Ohm's Law which relates the voltage across a conductor to the current flowing through it.
Resistance is measured in ohms (Ω), named after the German physicist Georg Simon Ohm.
The ohm is a measure of electrical resistance. It was named for the German physicist Georg Ohm.
The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.
3000 ohms are 3 kiloohms.
97 k ohms is equivalent to 97,000 ohms. Just multiply the value in kiloohms by 1,000 to convert it to ohms.
Ohms are smaller than k-ohms, so number of ohms must be a bigger number. Multiply k-ohms by 1,000 to get the same resistance in ohms.
135 ohms new, and will function properly down to 114 ohms. The chart in the '86-'87 book shows: Empty=110 ohms +/- 7 ohms Full=3 ohms +/- 2 ohms 1/2 full= 32.5 ohms +/- 4 ohms
A Megohm is one million ohms. To convert ohms to Megohms, divide by one million.
35 ohms
2 ohms of resistance
Here is what I go by, 0 - 15" min 3000 ohms, max 10000 ohms. 15 - 25" min 4000 ohms, max 15000 ohms. 25 - 35" min 6000 ohms, max 20000 ohms. Over 35" min 8000 ohms, max 25000 ohms.