0
When viewing a specimen, you must always use the lower power objective lenses first. Low power lens gives the widest field of view and makes it easier to find the specimen when you look through the microscope. Finding the specimen at high power, without first centering it in the field of view at low power, is nearly impossible.
The objective lens used to locate the specimen and the first focus is the low-power objective lens with a magnification typically ranging from 4x to 10x. This lens provides a wider field of view and lower magnification to help locate and focus on the specimen before switching to higher magnifications for more detailed examination.
Whichever objective has the lowest magnification. On many microscopes, it is the 4X or scanning objective.
The low power lens was first used
Add your answer:
Earn +20 pts
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
What are the parts of microscope and their meaning?
The main parts of a microscope are the eyepiece, objective lens, stage, focus knobs, and light source. The eyepiece is where you look through to see the specimen, the objective lens magnifies the specimen, the stage holds the specimen in place, the focus knobs adjust the focus of the specimen, and the light source illuminates the specimen for better visibility.
Which objective would you use to initially locate the specimen high or low power objective?
To initially locate the specimen, you should use the low-power objective. This objective provides a wider field of view, making it easier to scan the slide and locate the specimen before switching to a higher magnification objective for more detailed observation.
What objective brings a specimen into focus using a microscope?
The objective lens of a microscope brings a specimen into focus by adjusting the distance between the lens and the specimen. This is done by turning the focus knob to move the lens up or down, which changes the focal point and sharpens the image.
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
When beginning to focus a microscope what lens should you use?
You should start by using the lowest power objective lens, usually the 4x or 10x objective, to locate and center the specimen on the slide. Once the specimen is in focus, you can switch to higher magnifications for more detailed viewing.
Which objective do you use to focus a microscope?
You would use the coarse adjustment knob to quickly bring the specimen into view, and then the fine adjustment knob to focus on the details of the specimen.
What is shortest objective called on a microscope?
The shortest objective on a microscope is typically the scanning objective, which has the lowest magnification power (usually around 4x). This objective is used to locate and focus on the specimen before switching to higher magnification objectives for detailed viewing.
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
Why to start with 4x objective rather than higher power?
Starting with a 4x objective allows for a larger field of view and greater depth of field, making it easier to locate and focus on the specimen. Higher power objectives have a smaller field of view and shallower depth of field, which can make it challenging to find and keep the specimen in focus.
What are the parts of microscope and their meaning?
The main parts of a microscope are the eyepiece, objective lens, stage, focus knobs, and light source. The eyepiece is where you look through to see the specimen, the objective lens magnifies the specimen, the stage holds the specimen in place, the focus knobs adjust the focus of the specimen, and the light source illuminates the specimen for better visibility.
Which objective would you use to initially locate the specimen high or low power objective?
To initially locate the specimen, you should use the low-power objective. This objective provides a wider field of view, making it easier to scan the slide and locate the specimen before switching to a higher magnification objective for more detailed observation.
What objective brings a specimen into focus using a microscope?
The objective lens of a microscope brings a specimen into focus by adjusting the distance between the lens and the specimen. This is done by turning the focus knob to move the lens up or down, which changes the focal point and sharpens the image.
What is the first magnificationused to look at a slide?
The first magnification used to look at a slide is typically the lowest magnification objective lens, which is usually 4x or 10x. This allows for a wider field of view and helps to locate and focus on the specimen.
Why important to start focusing the lowest power objective?
It is important to start focusing with the lowest power objective because it provides a wider field of view and makes it easier to locate the specimen on the slide. Once the specimen is in focus at low power, you can then switch to higher power objectives for more detailed observation. Focusing at low power first also helps prevent the higher power objectives from coming into contact with the slide and potentially damaging the lens or specimen.
Which objective must be in position when you first set up a microscope?
I have always had the longest objective in position (pointing down), then lowered the lens to what I thought would be close to a good focus. This way, you can rotate the turret to the shorter lenses, and be assured that the lens body will not strike the stage or slide.
