0
Always add the acid to the water. Otherwise the acid can splash you and get on your skin and also if it is a concentrated acid, as you dilute it, a lot of heat is generated, and you want the larger volume of water to be able to absorb that heat.
Water in acid should never be done
Acid in water rarely goes wrong
Basically to avoid splashing acid up onto yourself. When adding acid to water and having a spilling/splashing accident one would get mostly water splashed on himself. The other way around, pouring water into acid, one would get acid splashed on himself. The other reason has to to with exothermic reactions that can take place with concentrated acids
Add your answer:
Earn +20 pts
Never pour water into this instead slowly pour this into water?
When diluting an acid , have a large quantity of water, and slowly poor the acid into the water. If done the other way around, by slowly poring water into the acid, it will boil and spit acid everywhere.
Why is acid poured into water but not water into acid?
Acid should be poured into water because it helps in diluting the acid gradually, reducing the risk of a sudden and potentially dangerous chemical reaction. Pouring water into acid can lead to a rapid release of heat, causing the acid to splash out and potentially causing burns or other hazards.
Should you pour water slowly into acid?
No, you should never pour water into acid. This can cause a violent reaction, splashing acid out. Instead, slowly add acid to water while stirring to dilute it safely.
If you are to mix acid and water which will you pour first?
Always pour acid into water, never the other way around. This helps prevent a sudden release of heat and potential splashing or boiling over of the mixture.
A student must make a 3 M acid solution using a 5 M acid solution Which of these is the safest way to make the solution?
The safest way to make a 3 M acid solution from a 5 M acid solution is by diluting the 5 M solution with water. To do this, you should measure out the volume of the 5 M solution needed to reach the desired concentration (3 M) and then add an appropriate amount of water to reach the final volume. Mixing acid into water can generate heat and splashes, so always add acid to water slowly while stirring to minimize potential hazards.
What should you use to pour acid into a jar without spilling the acid?
Use a funnel.
If you spill acid on your skin why should you rinse it with water?
Rinsing with water helps dilute and remove the acid from the skin, reducing the potential for further damage. Quick action can also help prevent the acid from penetrating deeper layers of tissue.
How do you flush citric acid from your system?
Drink more water then you can pour out of the sink.
You should not pour anything down drains?
Nothing acid or caustic, for sure.
How can you dilute a strong acid?
Acids are vigourous in nature. Therefore, it is completely ridiculous to pour water in acids( as this reaction is exothermic). Therefore, we take a beaker of water and pour the acid drop by drop to the water. Care must be taken and solution must be continuously stirred.
How do you control of alkalinity in waste water?
You would pour an acid into the water to create a salt which makes the water more neutral.
What is the rule for mixing acids and water?
Always add acid to water, not water to acid. This helps to prevent the acid from splashing back and causing potential harm, as adding water to acid can lead to an exothermic reaction and potentially dangerous spattering.
