fully operational
Most batteries today are sealed so a hydrometer is useless. A fully charged battery will read 12.6 volts with a digital volt meter. At 75% charge it will read 12.4 volts, at 50% it will read 12.2 volts and at 25% charge it will read 12 volts. But if you have another type battery then here is what you need to know. A fully charged Golf cart battery or fork lift battery will read 1300 A fully charged auto or truck battery will read 1275 A fully charge cell phone tower or solar storage battery will read 1250
Most batteries today are sealed so a hydrometer is useless. A fully charged battery will read 12.6 volts with a digital volt meter. At 75% charge it will read 12.4 volts, at 50% it will read 12.2 volts and at 25% charge it will read 12 volts. But if you have another type battery then here is what you need to know. A fully charged golf cart battery or fork lift battery will read 1300 A fully charged auto or truck battery will read 1275 A fully charge cell phone tower or solar storage battery will read 1250
Watch this: https://www.youtube.com/watch?v=SRcOqfL6GqQ
12v
12.5 volts
No it will have high conductance
With a fully charged battery (12.68 volts) and engine running at idle with no accessories on, 14.5 volts. You will not get a accurate reading if the battery is not fully charged.
Test the battery with a digital voltmeter. You should get a reading of 12.6 V if the battery is fully charged. If the battery is fully charged then you know the alternator is functioning properly and your problem is more than likely a defective starter.
If the charger has a ammeter on it then it should show close to zero which means the battery is no longer pulling any current from the charger which would mean the battery is fully charged. If it has only a voltmeter then it should show 12.5-13.5 vdc
When it is charging the screen reads: Battery Charging. When it is fully charged it reads: Battery Charged.
Be sure the battery is fully charged before you start. A fully charged battery should read 12.68 Volts. If the battery is very low when you check the alternator output it will not give you an accurate reading.