Want this question answered?
Be notified when an answer is posted
100MVA
it is depends on the rating of distribution transformer,e.g if there is 100 kva, then it will take 5.25amp.
Depends on the kva rating of the devices to be tested using a transformer.
A distribution transformer IS the term used to describe the utility transformer which supplies a residence.
Knowing the power rating of a transformer will help an operator use the transformer within its design limitations with regard to heating of the windings and their insulation.
No not really only some do :DAnswerFor transformers used in transmission and distribution systems, yes. Transformer oil is necessary for cooling and insulation purposes, enabling the 'footprint' of an oil-filled transformer to be smaller, and its rating to be higher, compared with those not filled with oil.
What limits the use of a transformer is its operating temperature, as excessively-high temperature will act to break down its insulation. The temperature reached by a transformer is a function of its rating (expressed in volt amperes), so operating a transformer below its rating is perfectly okay.
A transformer can be used to change the voltage to an appliance. The voltage rating of the transformer should be right for the voltages used, and the current rating of the transformer should not be less than the current drawn by the equipment.
Distribution transformers change the feeder voltage to utilization voltage required by the consumer. they are essentially step down transformer which changes the voltage to standard service voltage. their rating is about 200KVA. since these transformers are operated throughout a day, eventhough they r not carrying load r not, it should hav a good ALL DAY EFFICIENCY .
The maximum efficiency condition in distribution transformer is said to be occurred when iron loss = copper loss
yah! definately affects, the kva of transformer is suitable for the certain load according to the rating.
in isolation transformer earthing is not provide on secondary side but in ordinary transformer neutral of secondary side is earthedAnswerAn isolation transformer is a 1:1 ratio transformer; its function is to electrically isolate the secondary side from the primary side without changing the voltage. An example of an isolation transformer is the one used in a shaver socket.A distribution transformer is a step-down transformer, used within the electricity network's distribution system. An example of distribution transformer is a pole-mounted transformer, supplying low voltage to residences.(Of course, all mutual transformers provide electrical isolation between primary and secondary.)