0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Megger value for single conductor?
It depends on the value of voltage being applied to the wire in normal use. Voltages up to 750 volts can be used on wires reading as low as .5 meg ohms. Engineers like to see 5 meg ohms on conductor readings.
If A conductor has a resistance of 0.8 ohms what will happen to its resistance if the temperature is decreased?
The resistance of a conductor is directly proportional to the resistivity of the conductor. since the resistivity of a conductor is decreases with decrease in temperature hence the resistance.
Five resistors are connected together in series One resistor is 2 ohms one is 3 ohms one is 4 ohms one is 5 ohms and the fifth is 6 ohms What is the total resistance?
Purely additive. 2+3+4+5+6=20.
What would the resistance of the wire if the resistance is 10 ohms be the same if it were twice as long?
The resistance of a conductor is directly proportional to its length, hence increasing the length twice will increase the resistance twice as well. Therefore the resistance will be 2*10 = 20 Ohms
If you have flow of electricity which is 5 volts and 2.6k ohms what is the current?
I = V/R 5 volts / 2600 ohms = .00192 or round to .002.
Megger value for single conductor?
It depends on the value of voltage being applied to the wire in normal use. Voltages up to 750 volts can be used on wires reading as low as .5 meg ohms. Engineers like to see 5 meg ohms on conductor readings.
If A conductor has a resistance of 0.8 ohms what will happen to its resistance if the temperature is decreased?
The resistance of a conductor is directly proportional to the resistivity of the conductor. since the resistivity of a conductor is decreases with decrease in temperature hence the resistance.
What is the resistance of a conductor that carries a current of 120 amperes when the potential difference between its ends is 240 volts?
The resistance of the conductor can be calculated using Ohm's Law: resistance (R) = voltage (V) / current (I). Plugging in the values gives: R = 240 V / 120 A = 2 ohms.
What rate does electricity pass through a conductor?
This depends, you have amperage which is how much pressure of electricity is being pushed through the conductor. Next is what kind of conductor, the matters because of ohms, which is how much resistance is caused by the conductor
The property of a conductor that impedes the flow of charge is called?
The property of a conductor that impedes the flow of charge is called resistance. It is measured in ohms and depends on factors like the material, dimensions, and temperature of the conductor.
Perallel circuit two of them are rated 20 ohms one is 10 ohms what is the cicuits total resistance?
5 ohms
What is the value of Gold of a resistor?
red = 2violet = 7silver = 0.01gold = 5%The value is 27 * 0.01 ohms 5% or 0.27 ohms 5%
Five resistors are connected together in series. One resistor is 2 ohms one is 3 ohms one is 4 ohms one is 5 ohms and the fifth is 6 ohms. What is the total resistance?
Purely additive. 2+3+4+5+6=20.
Five resistors are connected together in series One resistor is 2 ohms one is 3 ohms one is 4 ohms one is 5 ohms and the fifth is 6 ohms What is the total resistance?
Purely additive. 2+3+4+5+6=20.
What would the resistance of the wire if the resistance is 10 ohms be the same if it were twice as long?
The resistance of a conductor is directly proportional to its length, hence increasing the length twice will increase the resistance twice as well. Therefore the resistance will be 2*10 = 20 Ohms
What is the ohms reading for the oil level sensor on a Briggs and stratton engine?
5 ohms
What is the resistance of acsr moose conductor?
0.0547 ohms/km - maximum DC resistance at 20'C. Britsh Standards.
