The absolute pressure at a depth of 10 meters in sea water can be calculated by adding the atmospheric pressure to the pressure due to the water column. At 10m depth, the pressure due to the water column is approximately 1 atm (equal to 10 meters of water column) and adding the atmospheric pressure of about 1 atm gives a total absolute pressure of around 2 atm.
Because water is denser than air.
The pressure in water increases by 1 atmosphere (101.3 kPa) for every 10 meters of depth. Therefore, the pressure in 10 meters of water would be approximately 101.3 kPa.
The GPE (gravitational potential energy) of the diver can be calculated using the formula GPE = mgh, where m is the mass (60kg), g is the acceleration due to gravity (9.81 m/s^2), and h is the height (10m). Plugging in the values, GPE = 60kg * 9.81 m/s^2 * 10m = 5886 Joules.
It will take 50 seconds for a man running at 10m per second to travel 500m. This is calculated by dividing the distance (500m) by the speed (10m/s).
10 m of water = 14 psi 1 m of water = 1.4 psi There is more to this... it should be as follows Pressure (P) = density of fluid (p)* gravity (g) * height of fluid (h) for example: p= ~1000 kg/m^3 (water at 20 deg C) g= ~9.81 m/s^2 (at sea level) h= 10 m of water Therefore: P=1000*9.81*10 P=~98,100 pascals (pa) = 98.1 kpa = 14.2 psi
Every 10 metres of water adds 1 ATM, so a depth of 10 metres is 2 ATM (the atmosphere of pressure at the surface plus the pressure of 10 metres of water). 10 ATM is reached at 90 metres, or approximately 295 feet (10 metres is approximately 33 feet). (The 1atm/10m is true for salt water at 15C; actual pressure/depth depends on water - fresh Vs salt - and temperature, but 1atm/10m is a good guideline for most purposes.)
Because water is denser than air.
1 atmosphere for every 10m
97.968 kPag
The water is pumped upwards by the atmospheric pressure acting on the surface of the water in the well. That is only strong enough to support a column of water that is 10m tall.The water is pumped upwards by the atmospheric pressure acting on the surface of the water in the well. That is only strong enough to support a column of water that is 10m tall.The water is pumped upwards by the atmospheric pressure acting on the surface of the water in the well. That is only strong enough to support a column of water that is 10m tall.The water is pumped upwards by the atmospheric pressure acting on the surface of the water in the well. That is only strong enough to support a column of water that is 10m tall.
1 atmosphere for every 10m
At a greater depth, there is a greater pressure, period. The amount of water in the dam is irrelevant.
The pressure in water increases by 1 atmosphere (101.3 kPa) for every 10 meters of depth. Therefore, the pressure in 10 meters of water would be approximately 101.3 kPa.
As a general rule, every 10m down you go, you increase 1 atmosphere or bar. So at 1500m you'd be at 150 bar
The volume of water in the rectangular swimming pool can be calculated using the formula for the volume of a rectangular prism, which is length x width x height. In this case, the volume would be 18m x 10m x 2.5m = 450 cubic meters.
Atmospheric pressure exerts more force on you if you are deeper than 10 meters. At 10m below sea level the atmospheric pressure is double that of on land and it increase with every 10 metres that you descend
Approximately 66 ft. (10m depth (about 33 ft) = 1 atmosphere) 1 atmosphere at the surface. 2 Atms at 33 ft./10M. 3 Atms at 66ft/20M. 10Atms at 90M. 100 ATM at 990M. Generally z atms at 9.8(z-1)M.