0
Replacing entire belt tensioner assembly On 1999 Bonneville loose but won't come off?
You may have stripped the bolt by turning it counter clockwise, which would allow the bolt to spin but not allow it to be removed. The bolt is reverse threaded. Even after being stripped, sometimes by turning the bolt clockwise it may be removed. Hope this helps. DCC
Add your answer:
Earn +20 pts
CHow can you know if your pulley is bad or the entire tensioner assembly on a Windstar?
If the tensioner cannot put a full 'load' on a new belt (as shown by the wear indicator markings on the side of the tensioner) - it's likely the tensioner requires replacing.NOTE: some sources recommend replacing it at 60,000A bad pulley (bearing) would be making whining/screaming noises.See "Related Questions" below for more
How do you remove a belt tensioner for a 1997 Pontiac sunfire?
Remove the serpentine belt. Tensioner is below Alternator. Remove the three mounting bolts on the tensioner baracket assembly. Replace entire unit.
How do you replace the belt tensioner on a 2001 SC1 coupe?
The serpentine belt is held by tention with a automatic belt tensioner. If the serpentine belt is loose, you will most likely have to replace the entire belt tensioner assembly. the assembly comes with a new pully. Please visit my bio for a link to my Saturn help site for pictures of the assembly.
What do you do if a 1995 dodge caravan tensioner pulley doesnt spring back?
The tension spring is broken, and the entire assembly must be replaced.
Can a crack in a dog bone motor mount be repaired?
Yes, but only by replacing the entire mount assembly.
How do you replace a serpentine tensioner on a 1997 Saturn SC1?
Remove the Right wheel and inner plastic fender which will allow you access to the tensioner side of the motor. There will be a few bolts holding into place on the block. Remove the bolts and remove the entire tensioner assembly. Reverse for replacement.
How can you replace your driver side headlight on your 97 ford escort?
Are you replacing the bulb or the entire assembly? - thunderheart the car guy
Will replacing the entire shifter assembly on your C230 cost a fortune?
i took it to my reputable mechanic and in total it's going to run near a thousand dollars. the shifter assembly itself is over 500!
Can you just change the front wheel bearings on 2000 Buick Regal or do you have to replace the entire hub assembly?
You can change the front wheel bearings on your 2000 Buick Regal without replacing the entire hub assembly. You can change each individual wheel bearing, if you choose.
How do you replace the ignition switch assembly on a 1990 Chevy half ton truck?
If this has the locking tilt wheel it is better to find a salvage yard and get the entire steering assembly . Can get for around $100. Parts and time for replacing the Ignition assembly if you can do it at all will not be worth the effort.
Do anyone know how to install a belt tensioner 2005 dodge neon?
Yes, it is part of the metal plate on the passenger side of the engine that the motor mounts bolts to. The entire assembly will need replaced.
How do you replace front wheel bearings on a 1997 silverado 4x4?
i am pretty sure the front bearings are part of the entire hub assembly. replacing the bearings requires replacing the enitre front hub. at least that's how it was on my 97 dualie.
