The wood should not need to be polished so I assume you mean the keys.
First of all, this may or may not work to your satisfaction (being as you apparently want them shiny). If they're plated, which most clarinets in the last 50 years are, polishing with abrasives or using mechanical means (like an electric powered polishing wheel) might go right through the plating. Many Clarinet don't have thick plating to start with.
Secondly, assuming the keys are in good enough condition to risk polishing, to do a good job on the keys (preferably manually and with the appropriate cleaners) the clarinet needs to be fully disassembled. It is just about impossible to polish the keys without damaging the pads, so, you're in for a complete repad. And in the process of polishing, the little corks under the keys will most likely either fall off or get damaged - some, if not all. So, you're in for new key corks and a complete readjustment of cork heights to get the timing and tuning of the clarinet reset.
Basically, you're in for the whole nine yards, since once the clarinet is apart you might as well have the tech get the wood treated.
Still want to get the keys polished?
ask the teacher on how muchit costs for the flute.
50 - 300 $
i dont know much about brands but the avrage flute can cost from about 90 dollars (used) to about 20,000 new if the flute is gold platted or silver platted it could be worth a lot of money but if it is a normal flute used it may only be able to be sold for about $100
The value of an Armstrong flute with a serial number of 7058438 varies depending on the actual condition of the flute. The flute might sell for as much as $150 or as little as $70.
Flute is worse. Saxophone is easier and more fun to play then flute.
ask the teacher on how muchit costs for the flute.
It cost about $30.00 at least that is how much charge.
$67.90
50 - 300 $
Depends on what kind you buy, they can cost anywhere from $200-$8000 new.
Like, usually $14,000. I found one for $13,829.
id do it for 50 dolars what is the bike
i dont know much about brands but the avrage flute can cost from about 90 dollars (used) to about 20,000 new if the flute is gold platted or silver platted it could be worth a lot of money but if it is a normal flute used it may only be able to be sold for about $100
free just call your nearest skateboard shop
like around 50.00 to 100.00 dls.it depens in how big is your house!!!!
I take mine every year, and it takes them a week to do it and it costs $40 (:
50-200 or more depending on size, amount and location of rust.