If the voltage supplied to the lamps is its operating voltage both lamps will have relatively the same output in brightness. If the 60 watt 110 volt lamp is used on a 220 volt supply, it will glow very brightly and then the lamp's filament will burn open. If the 60 watt 220 volt lamp is used on a 110 volt supply, the lamp will glow at half brightness, but it will last for a very long time before the filament burns open.
A volt is the unit of electric potential, an amp is the unit of electric current, and a watt is the unit of power. The relationship between them is described by the equation: Power (in watts) = Voltage (in volts) x Current (in amps).
To power ten 12 volt 10 watt lights, you would need a transformer with a total output of at least 120 volts and 100 watts.
12 volts is enough for a 12-volt 100-watt light bulb. It would not be enough for a 120-volt or 240-volt bulb.
Yes, you can use a 10 watt 12 volt bulb instead of a 5 watt bulb as long as the fixture can handle the higher wattage. Just be aware that the 10 watt bulb will be brighter and may generate more heat, so ensure there is proper ventilation and that the fixture can handle the increased power load.
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
Probably about 180 watts, assuming 90% efficiency.
There is no volt meter or amp meter in a DC watt meter.
no
17
This question does is not answerable. A watt is a volt times an amp. With out knowing how many amps the bulbs use there is no answer.
A watt is the product of amperage times voltage.
Ampire. watt/volt
no , it will burn out
yes the bulb will actually last longer
10000 watts / 220 volts = 45.4545 amperes
The same number as 250 Oranges is apples. A watt is a volt times an ampere.