1. The trim bezel around the gauge cluster, A/C controls and radio is held into place with two 7mm or Phillips head screws that face down above the gauges.
2. Once those two screws are removed the rest of the bezel is held in place with pressure clips.
3. To make removal easier, lower the tilt on the steering wheel and pull the gear selector down to Low.
4. Using only your hands (prying with a tool will leave marks or dents), pull on the outside perimeter of the bezel until all of the clips are pulled out. I like to start around the air vents above the radio and work my way around counter clockwise.
5. Once the bezel is loose it can be removed completely and set aside.
6. The radio is held in place by two 10mm bolts, one on the upper right, one on the left bottom, remove these and the radio pulls right out.
Dodge Durango was created in 1998.
The first Dodge Durango was the 1998 model year.
No.
The rear hatch on a 1998 dodge durango won't open
"Radio" or "rad" can be used, or you can find a number. If there is a number of the radio fuse, the manual or the fuse box cover to find the labeling.
Is it an African Durango or a European Durango? The Curb weight (ie without cargo or passengers) of the 1998 Dodge Durango is approximately 4700 pounds (2127 kg).
The Dodge Durango was introduced in 1998, therefore this question cannot be answered as is. However, the 1998 durango had a curb weight of 4689 lbs.
How do you change shift cylinoid on 1998 dodge Durango
NO.
1998
In the pan.
1998