Drain plug is next to the blade Place a ratchet head into the square plug and drain oil Replace plug and replace oil
Can be a defective plug wire, burnt valve, cracked head, or blown head gasket. Replace the spark plug wires. If you still have the miss, have a compression test run on all cylinders. Low compression on cylinder #4 indicates a burnt valve, cracked head, or blown head gasket.
Could be a few reasons, and can't be pinpointed without me actually seeing it "in action". But here are the most likely reasons, in order of likleyhood: 1) Spark plug not tightened to proper specs. Fix: tighen plug to proper specs with torque wrench. 2) Spark plug "washer" bad or gone. Fix: Replace washer. 3) Spark plug seals bad. Fix: Replace spark plug. 4) Bad threads in spark plug hole. Fix: Retap, or "Helicoil" it. 5) Crack in head near spark plug hole. Fix: Replace head.
The Plug that is hooked to the head light switch is melting, Get a new switch at a parts store, it will come with a new plug, it will be necessary to splice (solder) the plug. If you do not replace the plug and switch it will start a fire in the dash.
Your back freeze plug isn't on the head but the block. And a real B**** to change. Jack it up and unbolt the bell housing to get to it.
no you do not..hope this helps!!!
If there is only one plug, try removing the plug, spraying WD40 in the plug hole, replace the plug and try starting.
Remove the head light cover plate, then remove head light braket, once you have done that pull the light out and un-plug it.
The oil drain plug for the Craftsman 625 series lawnmower is located on the bottom of the mower, just above the blade. Tip the mower back. The plug is round and threaded with a square head. Using the square head of a ratchet extension, twist the plug counterclockwise and remove. The oil will start draining. Once it has drained, replace the plug and tighten clockwise until snug. Replace with new lawnmower oil or SAE-30 weight oil.
Is there a freeze plug on the back of the head of a straight 6 cylinder 93 Ford F150? I have a little pin hole leak shooting against my firewall, I cant see where its coming from. Yes there is one in the back of the head. Probably have to remove the head to replace it.
Replace freeze plug in a 1998 ford windstar ?
How do you replace freeze plug 1999 Ford Taurus?